Product Overview
Brand: NLQR
Color: Gray
Features:
- 【VEHICLE FITMENT】This 2-piece bottom seat cover set Fit for Toyota Sequoia (2001, 2002, 2003, 2004, 2005, 2006, 2007) and Toyota Tundra (2000, 2001, 2002, 2003, 2004, 2005, 2006). Covers all trims: SR5, Limited, and Base. Fits all Tundra cab configurations — Regular Cab, Access Cab, and Double Cab.
- 【2-PIECE BOTTOM SEAT COVER SET】Package contains 1x driver side bottom seat cover + 1x passenger side bottom seat cover. This is a direct replacement — you remove the old cracked or worn bottom cover and install this new one in its place. The finished result looks like the seat came straight from the factory. If you also need lean back covers, armrest covers, or headrest covers, check our NLQR store for matching sets in the same Gray color.
- 【GRAY MICROFIBER LEATHER】Made from microfiber leather in Gray, designed to match the original factory interior color. Note: your existing seats may have faded from UV exposure and daily wear, so the new covers may appear slightly different since they represent the original factory shade.
- 【HOW TO INSTALL — 4 SIMPLE STEPS】(1) Unbolt the seat from the vehicle floor using a socket wrench and disconnect any electrical connectors for heated or power seats. (2) Flip the seat over and remove the old bottom cover — use pliers to release the hog ring clips holding the cover to the frame. Be careful not to damage the bow clips underneath. (3) Stretch the new NLQR cover over the foam pad and secure it using the original or new hog ring clips. (4) Reinstall the seat, reconnect all wiring, and bolt it back down. One seat takes about 30-45 minutes.
- 【KEEPS ALL SEAT FUNCTIONS WORKING】These covers work with heated seats, power-adjustable seats, and standard manual seats without any modification. The covers arrive without pre-cut openings — you make small cuts where needed for power seat switches and wiring pass-throughs based on your specific seat layout.
