Product Overview
Brand: EVI Herrajes
Color: Matte Brass - White Rubber
Features:
- WALL MOUNT - Place the door stop on the wall at the height of the handle to protect your walls and doors from possible bumps and impacts.
- PROTECTOR RUBBER - This door stopper is designed with a white natural protective rubber that absorbs impact and reduces noise.
- BRASS STOP 0,94 x 0,55 Inches - This decorative door stop made of satin matte brass measures 0.94 x 0.55 inches. Paired with its black protective rubber, it has a clasic look.
- TWO WAYS OF INSTALLATION - You can install the stop with screw (for heavy doors) or with adhesive (3M brand). We DO NOT RECOMMEND adhesive for rough or specially painted floors. Screw and dowel are included for easy installation.
- SPAIN PRODUCT, TRADITIONAL MANUFACTURER - In EVI Herrajes, we believe in the details and the quality of our products. You can discover our range of door stoppers for bottom of door, wall door stoppers and more in our Amazon Store.
Details: Following these simple tips, you will achieve perfect attachment: . -choose the appropriate placement point. -clean the floor thoroughly; for wooden floors, with a damp cloth and then dry well; for terrace floors, with a cloth dampened in alcohol and then dry well. -remove the protective plastic; do not touch the adhesive area with your hands. -choose the location well and place the stop. -very important: press for better attachment and avoid moving it once installed. (the adhesive may lose adherence if the stop is manipulated once installed. ). -try not to bang the door too hard with the stop during the first 24 hours; the adhesive achieves its optimal level of functioning after 24 hours. *The manufacturer 3m recommends warming the adhesive slightly before its installation (for example, with a dryer or heat gun), in order to soften the adhesive briefly. . Recommendations: . We do not recommend placing adhesive stops with rough walls, reinforced doors, access doors, front doors to the home or establishments; in these cases, we recommend any of our stops with base and screw attachment, such as for example For these cases, we recommend using the already incorporated concealed screw attachment option. Separate the rubber from the base where you can access its screw attachment system. Once the base has been installed in the desired location, simply replace the rubber to hide the screw and leave the stop perfectly installed.
EAN: 8435336619008
