Product Overview
Brand: Clemons Concrete Coatings
Color: Clear
Features:
- PENETRATING WET LOOK WITHOUT HIGH GLOSS — Supreme Shield SB-600 is a solvent-based penetrating sealer that deepens surface color and delivers a wet look appearance without the plastic or high-gloss finish associated with traditional film-forming sealers.
- REPELS WATER AND OIL TO RESIST STAINING — Once treated, the surface resists water and oil penetration, helping protect stamped concrete, brick pavers, and other porous concrete surfaces from staining.
- DESIGNED FOR POROUS CONCRETE SURFACES — Suitable for stamped concrete, concrete pavers, and other porous concrete surfaces. Not recommended for non-porous or previously sealed surfaces with incompatible coatings.
- COVERAGE — Textured or Stamped Concrete: 200 sq. ft. per gallon. Coverage will vary based on surface porosity and application method. Apply two thin coats with an acetone-resistant pump sprayer or solvent-resistant roller. Foot traffic: 4 hours; vehicle traffic: 48 hours.
- MEETS ASTM C-309 AND ASTM C-1315 STANDARDS — Apply only when surface and air temperatures are between 50°F and 90°F. Clean tools immediately with A-1 Solvent or Xylene. Do not thin product.
Details: Supreme Shield SB-600 is a solvent-based penetrating concrete sealer designed for stamped concrete, brick pavers, and other porous concrete surfaces where a natural wet look finish is preferred over a traditional high-gloss film-forming sealer. Unlike film-forming sealers that sit on top of the surface, SB-600 penetrates into the substrate to repel water and oil from within, helping prevent staining while maintaining a more natural appearance. The wet look finish deepens and enriches surface color without the plastic or overly glossy look that film-forming sealers produce, making it a strong choice for surfaces where a more subtle, natural enhancement is desired. Surface must be clean, dry, and sound before application. Remove dirt, grease, oil, and any incompatible existing coatings. Rinse well with a pressure washer and allow 24 hours to dry. Apply only when surface and air temperatures are between 50°F and 90°F. Two thin coats recommended. Coverage: 200 sq. ft. per gallon on textured or stamped surfaces. Apply with an acetone-resistant pump sprayer or solvent-resistant roller. Allow 4 hours before foot traffic and 48 hours before vehicle traffic. Clean tools immediately with A-1 Solvent or Xylene. Do not thin product. Note: This product cannot be shipped to the following states: AK AZ CA CT DC DE HI IL IN MA MD ME NH NJ NY OH PA RI VA VT
