Product Overview
Brand: ZVKV
Features:
- High-Torque Performance: 1pcs 37GB520 gear motor, 1pcs 37mm mounting bracket, high-torque delivers reliable power with 5RPM speed and robust gearbox reduction
- 37mm Eccentric Output Shaft: Precision-engineered eccentric shaft enables smooth oscillating or vibrating motions, perfect for mechanical linkages, shakers, or creative DIY projects
- CW/CCW: Positive and Negative Rotation, support forward rotation(CW/CCW), also can adjust the speed, but the motor speed can only be reduced, can not be raised
- 12V DC Motor: 12v dc motor is widely compatible with 12V DC power systems, making it easy to integrate into existing setups or new builds, pure copper wire core rotor, with precision winding technology, the geared motor power instant increased by 30 percent
- Application: Large torque reduction motor is widely used for various industries micro machinery, such as processing machinery, printing machinery, robots, packaging machines, lawn mowers, circulating fans, automated production lines, turntable motion control, various instruments, etc
Details: Model Number: 37GB-520 Voltage: 12V DC No Load Current: 0.15A Working Current: 0.6A No Load Speed: 5 - 600RPM Torque: 0.19 - 23.4 kgf.cm Power: 5W Shaft Diameter: 6mm(D-Shaft) Shaft Total Length: 86mm Commutation: Brush Installation Screw Size: M3 Rotation Direction: CW/CCW Stall Current: 1.65A Product Name: 37GB520 Geared Motor Reduction Ratio: 1 : 17.4 Output Shaft Length: 15mm D-Shaped Output Shaft Size: 6 x 14mm (0.24inch x 0.55inch) (D x L) Gearbox Size: 37 x 23mm (1.46inch x 0.91inch) (D x L) Motor Size: 36.2 x 33.3mm (1.43inch x 1.31inch) (D x L) Storage Temperature: 0 - 40 Celsius degree Storage Humidity: 15 - 90 percent RH Motor Use Temperature: 0 - 70 Celsius degree Note: 1. If the motor does not work properly, it may be because the electrode piece may be knocked into the motor during transportation due to collision, causing connection problems. Gently pull out a little and try again. 2. When you use the motor, there should be no binding objects, such as adhesive should not flow into the bearing through the rotating shaft, which will harm of the motor. 3. When soldering the motor terminals of positive and negative power supply, the temperature of the soldering iron should be 340 Celsius degree to 40 Celsius degree and the heating time should be within 3 seconds. 4. When installing the motor, the screws are too long, which may cause contact between the motor itself and the rotor, and may affect the characteristics. 5. Handling motors: Please gently, as far as possible the use of motor shell part. 6. Motor wiring: Red lead to the positive electrode, black lead to the negative pole, if reversed, the motor rotation in the opposite direction.
