Product Overview
Brand: Funnytek
Color: Black
Features:
- 【Wet Room Floor Barrier】The rubber material makes this shower seal strip flexible enough to create all sorts of curved shape to fit most corners and edges. Beyond the shower area, this shower seal strip is also perfect for various applications such as kitchen sink edges, shower tray, bathtub perimeters, and countertops. It can even be trimmed to your desired length to fit the applied areas.
- 【Shower Tray Sealing Strip】First clean and dry the surface, then measure and cut to the desired length, and peel off the adhesive back strip, finally stick it to the smooth surface.Dry for at least 24 hours without exposure to water. Note: For long-term use, it is recommended to use silicone sealant (packaging not included) to fill the edges of the shower water barrier.
- 【Shower Water Barrier】The height of the shower sealing strip is only 12mm0.47in. Compared with the collapsible water dam, it cannot block the water flow with a height of >12 mm, but the low height will not cause movement obstacles and can block the spread of water in a large area. Please clarify your needs before purchasing.
- 【Shower Threshold】The wet room floor seal is made of food grade organic silicone, which is corrosion resistant, high temperature resistant, wear resistant and does not have a peculiar smell. It's flexible and can be cut at will, and the smooth surface makes it very easy to clean.
- 【Silicone Door Seal Strip】1.Around the shower water barrier must be sealed with extra sealant(Package does not include).2.For better stickiness, you can heat up the back glue with hair dryer. 3.In the corner, we recommend you cut it to 45 degree, and then connect two part to ensure its firmness.
Details: Cautions: In order to achieve stable and lasting effect , please pay attention to the follow question This floor seal suit for kinds of Smooth flat floor, such as smooth marble floor, coating floor and other smooth surface. can not use for Severe sags and crests floor, big gap floor and Mosaic glass floor. use with silicone sealant: Fill the gap between the walls with the two ends of the water barrier and all around of bottom by silicone sealant to achieve a completely hermetic effect, remove the excess glue to make the contact smooth. Clean the ground and dry it before installation! Not peeling all of sticker one-time: Mark the position and measure suitable length before peeling sticker, peeling sticker little by little one side and then press the peeled position to the surface as the same time, then peeling left little by little. Not peeling all of sticker for one-time and pull up the water retaining strip if found its not install well. After the installation is completed, it needs to be kept dry for 24 hours, and it needs to be postponed for 1-2 days in autumn and winter. Appilcation: Sink Countertop,Shower Cubicle,Shower Door Bottom,Bathtub,Shower Floor Installation method: Measure:Measure the length and width of the countertop, In the corner, we recommend you cut it to 45 degree, and then connect two part to ensure its firmness. Tear off the adhesive: in this process avoiding dust on the adhesive strip and affecting its adhesion. Paste: apply the water dam seal gently and slowly, keeping it horizontal or vertical, pressing gently with your fingers. Glue:The most important and necessary step is to fill the bottom edge of the water retention strip with caulk to ensure a long-lasting and strong adhesion.
