Product Overview
Brand: P1TOOLS
Features:
- Low Working Pressure Max 1/2 PSI（65mbar）, CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread
- Material: The fire pit gas control valve kit are made of high quality brass material with heavy-duty construction for durable use.
- Size: Thermocouple Length: 600mm/23.62inch; Head Tip: M8; Knob Diameter 44mm; "D" Insert for Valve: 6.0-6.1mm
- Application: Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater
- For more installation details and possible problems, see the detailed description below.This universal valve assembly requires some hands-on capability for DIY replacement.
Details: Specifications: Thread of 5/8''-18UNF Inlet & Outlet 750mm thermocouple with M8*1 threaded head Bakelite knob OD 38mm, D shaft 6.1mm Operation Instructions: 1). Fix the valve on a plate or board of your grill or fire pit by the head screw and flange. 2). Connect your inlet and outlet hose on inlet and outlet side. (fix it tightly enough in case of gas leakage) 3). Fix the thermocouple nut M8 on the valve end tightly (Check if your valve end thread if 8mm before you buy) 4). Connect thermocouple and end thread well 5). Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough. 6). Release your hand and it work properly If when you release hand, gas valve shut off again, please check a. If your thermocouple is always be heated on flame b. If the thermocouple end is well connected with valve c. If the inlet and outlet side well connect with hose you have Low Pressure Max 65mbar (1/2PSI) safety valve. Package Included: 1 Pc x Gas Control Valve with Thermocouple and Knob Switch
UPC: 779640709658
EAN: 0779640709658
