Product Overview
Brand: 4into1
Features:
- Reproduction Yamaha lights / turn signal / horn switch assembly for many of the DT dual sport models from 74-76
- Wire harness overall length = 28" (loom 1 is 20" long) Loom 1 = 6 Male bullet terminals, yellow, brown, light green, dark green, pink, light orange/white line, and 1 dual female bullet terminal (blue)
- Loom 2 = 6 pin connector, white, blue/white line, green/white line, green red/line, yellow white line, brown
- Replaces Yamaha Part Numbers: 558-83972-60-00, 498-83972-62-00
- Fits Yamaha: DT100C - 1976 | DT175C - 1976 | DT250B - 1975 | DT250C 1976 | DT360A - 1974 | DT400B - 1975 | DT400C - 1976
Details: Reproduction Yamaha lights / turn signal / horn switch assembly for many of the DT dual sport models from 74-76. It's common for the stock switches to wear and corrode from decades of use. Sometimes the horn button breaks or the turn signal switch no longer clicks into place. Lights, horn and turn signals are necessary safety features to have working! If you are running aftermarket handlebars check to make sure the 28" wire harness is long enough. This switch is designed to have the wires run outside the handlebars. Wire harness overall length = 28" (loom 1 is 20" long) Loom 1 = 6 Male bullet terminals, yellow, brown, light green, dark green, pink, light orange/white line, and 1 dual female bullet terminal (blue) Loom 2 = 6 pin connector, white, blue/white line, green/white line, green red/line, yellow white line, brown Replaces Yamaha Part Numbers: 558-83972-60-00, 498-83972-62-00 Note: This switch is similar to the DT125/175/250/400 1977-1978 and XT250/500 models but the wiring is not the same. Fits Yamaha: DT100C - 1976 DT175C - 1976 DT250B - 1975 DT250C 1976 DT360A - 1974 DT400B - 1975 DT400C - 1976
