Product Overview
Brand: ChongXiao
Color: Red
Features:
- VERSATILE VOLTAGE: Compatible with multiple voltage systems including 36V, 48V, 52V, 60V, and 72V, making it suitable for various electric bike and scooter configurations
- COMPREHENSIVE DISPLAY: LCD panel shows real-time speed, mileage, and power assist gear levels for enhanced riding experience and control
- INTELLIGENT FEATURES: Equipped with regenerative braking, PAS (Pedal Assist System), and automatic motor phase angle identification for optimal performance
Details: about controller: voltage：36V/48V/52V/60V/72V universal current：34A-40A number of transistors: 15 rated power：1000W-1200W-1500W all can work 1.high -level brake 2.brake light power 3.throttle handle 4.reverse gear 5.low brake 6.hall (5wires) 7.linear brake(Thumb brake) 8.PAS 9.head light/tail light power 10.regenerative brake 11.intelligent recognition 12.LCD 13.ignite 14.XT60 battery 15.phase line how to connect ？ 1.connect the phase line color to color connection 2.connect the hall line,color to color connection 3.connect the battery line(red wire :battery + , black:battery-) 4.connect the controller LCD line,connect the ignition switch（if your throttle not have ignition switch，controller ignition 2 wires need short together） 5.off power,let two intelligent recognition line connect together,open power,the wheel will forward or reverse. (1.if wheel forward ,Separate the intelligent recognition line. 2.if wheel reverse, Separate the intelligent recognition line. let 2 intelligent recognition lines connect together again,if wheel forward ,Separate the intelligent recognition line. 3.This function allows the controller to intelligently identify the battery voltage and adjust the rotation direction of the motor） NOTE:when use throttle，intelligent recognition must separate.） 6.other functions can be connected as needed. LCD display communication protocol: UART about introduction to LCD display parameters： 1. Working voltage: 1. Working voltage: 36V,48V,52V,60V,72V (the default is 36V, the buyer can set the voltage value by himself) Instrument 5-wire interface: Red: Meter power cord Blue: Power control wire of the controller Black: instrument ground wire Green: the data receiving line of the meter Yellow: the data transmission line of the meter 2. Code Meaning: 6 Battery undervoltage 7 Motor failure（check motor hall is 5wires？and is color to color connect？） 8 throttle handle failure 9 Controller failure 10 Communication reception failure 11 Communication sending failure 12 BMS communication failure 13 Headlight failure 3. Settings P01: Backlight brightness, level 0001 is the darkest, level 0003 is the brightest; P02: mileage unit, 0000: KM; 0001: MILE; P03: Voltage level: 24V, 36V, 48V, 52V,60V,default 36V; P04: Sleep time: 0, no sleep; other numbers are sleep time, range: 1-60; unit is minute; P05: Power-assist gear: there are 3rd, 5th, and 9th gears adjustable; P06: Wheel diameter: unit, inch; precision: 0.1; P07: Number of speed measuring magnets: range: 1-255; P08: Speed limit: the range is 0-100km/h, 100 means the maximum speed limit, 1. Communication status (controller control): The drive speed is maintained at the set value, Error: ±1km/h; (both power assist and handlebar speed limit) Note: The value here is based on kilometers. When the unit setting is converted from kilometers to miles, The speed value on the display interface is automatically converted to the correct mile value, but this The speed limit data set in the menu is not converted, which is inconsistent with the actual displayed mile speed limit value; P09: Zero start, non-zero start setting, 0: zero start; 1: non-zero start; P10: Drive mode setting 0000: Power-assisted drive (determine how much power is output by the power-assisted gear, at this time Handlebars are invalid). 0001 : Electric drive (drive through the handlebar, the booster gear is invalid at this time). 0002 : Power-assisted drive and electric drive coexist at the same time (electric drive zero start state invalid). P11: boost sensitivity setting range: 1-24; P12: Power-assisted start strength setting range: 1-5; P13: Three types of power-assisted magnetic steel discs: 5, 8, and 12 magnets P14: (0 gear), value: 1 (excluding 0 gear) P15: cruise, value: 0 does not cruise P16: total mileage reset, ODO reset P17: factory reset P18: Default value, cannot be changed 4. the button introduction:M is the power button The key operation is divided into short press and long press, and combination key long press Short press for quick/frequent actions like: 1. When riding, short press the up button or down button to modify the assist/speed gear; 2. Power button Switch the multi-function area to display data while riding, short press Single button long press is mainly used for mode/switch state switching Compound key (long press) is used for parameter setting, because the operation is complicated, which can reduce misoperation (Short press does not make compound keys, because it is easy to trigger by mistake, and it is too difficult to operate) Specific operation explanation: 1.If the current display is working, long press the power button, it will turn off the display, otherwise it will turn on the display 2. After the display screen is turned on, short press the M key to switch between display modes 3. Modify the assist ratio/electric gear Assuming that it is currently in assist mode 1) Short press the up button, boost + 1 2) Short press the down button, boost - 1 4.
