Product Overview
Brand: Derby Dust
Features:
- MUST FOLLOW INSTRUCTIONS>>> REAM DRILL HOLES BEFORE USE >>>>Use with or without block slots.
- Drill Rear Axle holes camber canted - 3 degrees
- Drill axle hole high
- Drill axle hole Steer - only tested on wedge with .75" COG
- Drill zero degree if all wheels must touch
Details: Pine Derby Wood Cars Axle Drill Guide Axle Drill Guide the best Axle Drill guide we offer. Use the key for slots for perfect axle alignment. Omit the key if you are using a block without slots. Slightly over sized because we know there are rarely any blocks perfectly 1.75″ in width. Make sure to register the same side against the Guide when not using key for drilling. Use pin vise for years of use. Can be used with drill with ease. Ready for any setup Pine Derby Wood Cars Drill tool options: -3 degree rear camber -0 degree -Drill High Wheel -S- Steer positive camber with toe in for 3/4" COG - prototype -#44 Drill bit included The pinewood Slot Problem solved with Pine Derby Wood Car Axle Drill Guide Pine Derby Wood Cars Axle Drill Guide is the solution to a 80 year old problem! How does a builder place axles in the slots without breaking wood? So I make about 25 cars bodies a day and a lot of people ask me to pre-drill slots. It was a hit an miss thing to accurately drill into the slots. Even with the fancy $150 drill guides, I can never be 100% certain I was dead on center of the slot. Just never could visualize the correct alignment. And why does it matter? Well simply because if you are off, then the size of the hole is the drill bit plus the slot. Makes for loose axles. Sometimes I was way off, and had to remake a entire body to fix my mistake. I hate wasting time. What I also found is that the guide portion of the drill was not long enough to keep the bit straight for the 3 degree camber. No more worries! Derby Dust axle Drill Guide for pinewood scout Axle slots is the perfect and only tool you should now use to drill axle slots. Made of environmentally friendly PLA plastic, this tool can be used over and over. We have no problems drilling 25+ cars on a single jig Included is a #44 drill bit for perfect axle install. Drills a perfect .086″ diameter hole for your derby axle every single time!
UPC: 636160181633
EAN: 0636160181633
